Viking Software – WASSP Multibeam Trials

WASSP-MBES1The highly cost effective third generation of the WASSP multibeam system was provided to us for integration and trials into our Viking software.

A generously provided survey vessel was used during trials and demonstrations on an active construction project.WASSP-MBES2

Posted in News

New GeoDredge Grab Dredge system for CAMA VOF

CAMA-GeoDredge
A GeoDredge system was installed on the crane vessel CAMA, owned and operated by CAMA VOF from The Netherlands.The installation consists of a full 3D Viking RTK system for the grab dredge, and a Viking navigation system for the vessel’s wheelhouse. Using an industrial, wireless high speed link, data is shared in realtime between the Viking systems in the crane and in the wheelhouse.

Posted in News

Highly Successful Offshore Energy 2015 Exhibition!

OffshoreEnergy2015We would like to thank all who were able to make it to the Offshore Energy exhibition in Amsterdam last week! It was an astounding successful event with many old and new faces.

We showcased some new projects and products such as our GeoSonic – Portable multibeam system, our new rapid deployment TMS, and our very successful Offshore Rental System.

Next up the Europort Exhibition in Rotterdam, see you there!

Posted in News

Second Viking Offshore system for Hydrotechnik Lubeck

A complete 19” rack mounted Viking Offshore system was installed on the Blue Aries for Hydrotechnik Lubeck. Hydrotechnik Lubeck uses Viking Offshore combined with our GeoGNSS, 19” rackmount GNSS receiver for their offshore bubble hose laying operations.Viking Offshore Viking Rackmount System

Posted in News

GeoDredge Featured in the Dredging Port and Construction Magazine

A short feature about our GeoDredge systems working on the dredging project in the Dutch river Vecht was recently published in the international Dredging Port and Construction Magazine.

Click here for the full article.

DredgingAndPortConstructionMagazine2015

Posted in News

Viking TMS Installation on the Stemat Spirit for Gemini Wind Farm

StematSpirit2 StematSpirit1

On-site installation of our Viking Tug Management System on the cable laying vessel Stemat Spirit and two anchor handling tugs for the Gemini wind farm.

Using the advanced anchoring module in the Viking software the Stemat Spirit was able to create, use and adjust an anchor plan consisting of seven anchors. All carried out in realtime during the delicate cable laying operation.

At the same time, and using long range UHF, both anchor handling tugs received all planning information and any changes in the plan in realtime, along with clear visual representation of which anchor to place on which location on the seabed.

Posted in News

Upcoming Events:

Upcoming Events:

Sign up for our Newsletter

* = required field

Archives